Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with D.R. EQUIPMENT SERVICES LIMITED!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Roland DWX-4W Wet 4-Axis Dental Milling Machine
$6,500.00
Shipping terms: CIF (5-6 days world-wide delivery)Payment method: Bank t/t,Bitcoin,Money Gram,Western union & RiaInsurance fee: To be calculated after order processingWarranty: 2-YearsMOQ: 1 PieceTechnical Data:Cuttable materialGlass ceramics, Composite resinLoadable workpiece shapeWidthMaximum ..
Shipping terms: CIF (5-6 days world-wide delivery)
Payment method: Bank t/t,Bitcoin,Money Gram,Western union & Ria
Insurance fee: To be calculated after order processing
Warranty: 2-Years
MOQ: 1 Piece
Technical Data:
| Cuttable material | Glass ceramics, Composite resin | |
| Loadable workpiece shape | Width | Maximum 40 mm (1.57 in) |
| Depth | Maximum 20 mm (0.79 in) | |
| Height | Maximum 20 mm (0.79 in) | |
| Operating speed | 6 to 1,800 mm/min. (0.24 to 70.9 in./min.) | |
| Spindle motor | Jaeger high frequency spindle | |
| Spindle speed | 15,000 to 60,000 rpm | |
| Rotary axis travel angle | A axis | ± 360° |
| Number of burs housed | 4 | |
| Attachable bur | Shank diameter | 3 mm Dedicated milling bur for wet grinding |
| Compatible compressed air* | Pressure | 0.7 to 1.0MPA (101-145psi) |
| Air Capacity | 114L/min (30gal) or more | |
| Tank Capacity | 33L (8.7gal) or more | |
| Interface | USB | |
| Control command set | RML-1, NC code | |
| Power requirements | AC 100 to 240 V ± 10%, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1) | |
| Power consumption | Approx. 200 W | |
| Operating noise | During operation | 70 dB (A) or less (when not milling) |
| During standby | 48 dB (A) or less | |
| External dimensions | Width x Depth x Height | 480 x 538 x 599 mm (18.9 x 21.2 x 23.6 in.) |
| Weight | 53 kg (116.8 lbs.) | |
| Installation environment | Indoor use, Altitude | Up to 2,000 m (6,562 ft.) |
| Temperature | 5 to 28 °C (41 to 82.4 F) | |
| Relative humidity | 35 to 80 % (no condensation) | |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) | |
| Short-term temporary overvoltage | 1,440 V | |
| Long-term temporary overvoltage | 490 V | |
| Included items | Power cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit | |
| System requirements for USB connection | Operating system | Windows® 7/8/8.1/10 (32 or 64 bit) |
| USB cable | Use the included USB cable | |